Parts & Accessories

- Horizontal square interface - Only includes left crank

The Wheels Manufacturing PressFit 30 Bottom Bracket Adaptor for Shimano Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SHIM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SHIM to adapt 24mm Spindle Cranks (Shimano, FSA, etc.) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter

- 3/8" thick Lexan for lightweight protection - Includes (4) 15mm male chainring bolts

SRAM Bearing Adjuster

• BOTTOM BRACKET BEARING ADJUSTER BB30 PRESSFIT 30
• SRAM Model ID: BB-SPP-A0

Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips.



Compatible with:



- Race Face

- Turbine Cinch

- Atlas Cinch

- Atlas (24mm Spindle)

- Turbine (24mm Spindle)

- Aeffect Cinch (175mm length ONLY)

- Most other popular alloy MTB cranks (except some alloy DH cranksets)

- Replacement bolt for DUB cranks

Wheels Manufacturing FSA PF30 Adapter for 24mm Spindle Cranks adapts 24mm Spindle Cranks (Shimano, FSA, etc.) to work on Pressfit 30 frames with FSA's PF30 bottom bracket installed. Simply tap the adapters into the 6806 bearing in the BB shell, install the spindle and cranks. Use our Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. - Machined engineering-grade Delrin - 48g/pr *NOTE: The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter

SRAM Crank Arm Fixing Bolts

• CRANK ARM BOLT KIT SELF EXTRACTING M15/M22 GXP BLACK
• SRAM Model ID: FC-SPP-A0

- Upgrade your existing Force E1 crank with a spindle based power meter
- Proven Quarq reliability and accuracy
- Long battery life to power a season of rides
- Waterproof (IPX7) waterproof to 1 meter for 30 minutes)
- Spindle-based unit measures left side power to calculate total watts
- SRAM Model ID: PM-FRC-ASSY-E1

- 42x30x7mm BB30 cartridge bearings housed in a press-fit, composite sleeve assembly for use with a BB386EVO or BB30 crankset in a BB386EVO or Press-Fit 30 (PF30) frame - Road sets include bearings, shields and a wavy washer - Mountain sets include bearings, shields and a spacer - Choose ceramic or stainless steel options

- M30 cap with self-extracting crank bolt and washer - Compatible with 2013 and newer FSA Gossamer cranks

Race Face Crank Arm Fixing Bolts - M18 Crank Bolt - Fits 15SX/Atlas/SixC CINCH - Self-extracting

Problem Solvers Crank Arm Fixing Bolts - 8mm - Sold as a pair